Wireless Temperature/Humidity Station

Product number:6382

Customize your Vantage Pro2 weather station by adding a Wireless Temperature/Humidity station. This solar-powered wireless station will send temperature/humidity data to your Vantage Pro2 console, Vantage Connect, Weather Envoy or Envoy8X

Get additional temperature/humidity data

Need additional temperature/humidity data from your garden, wine cellar, attic or basement, greenhouse, or garage?  Take advantage of the customizing options of your Vantage Pro2 system by adding a Wireless Temperature/Humidity station.

Data from up to eight stations may be viewed on a single Vantage Pro2 Console/Receiver (sold separately).

Also works as part of a remote station when used with Vantage Connect.

 View data online, on your PC, or on a console

The station will send data to any wireless Vantage receiver, such as Vantage Connect, Weather Envoy or a console.

To upload your data to WeatherLink.com:
• Add Wireless Vantage Connect
•Add a Wireless Vantage Pro2 console and WeatherLinkIP

To upload to your PC:
•Add WeatherLink (serial or USB) data logger to a wireless Vantage Pro2 console or Weather Envoy

To view the data on a console without uploading to your PC:

•Add a wireless Vantage Pro2 console

Plenty of power

·                Expected battery life for included lithium backup battery is several years under normal conditions.

·                Temperature and humidity sensors are inside a protective radiation shield that protects against solar radiation and other sources of radiated and reflected heat.

Reliable, real-time data transmission

·                Wireless transmission up to 1,000 ft. (300 m)

·                Wireless transmitter and backup battery are inside a weather-resistant shelter

·                Temperature updates every 10 seconds

·                Humidity updates every minute

·                Frequency-hopping spread spectrum radio for continuous data transmission

·                Sensor connected to transmitter via 20 in. (50 cm) cable

Includes

·                Temperature and humidity sensors in a passive radiation shield

·                20 in. (50 cm) cable to connect the sensors to the transmitter

·                Shelter with solar panel

·                Transmitter

·                Lithium backup battery

·                Hardware for mounting on fence post or pole

Requires

Any wireless Vantage Pro2 receiver, including:

·                Wireless Vantage Connect

·                Wireless Vantage Pro2 console

·                Wireless Weather Envoy

·                Envoy8X

Wireless Temperature/Humidity Station Spec Sheet (6382)

6382_SS.pdf