LOGO

Solar-Powered Wireless Sensor Transmitter 6332

Solar-Powered Wireless Sensor Transmitter 6332

Solar-Powered Wireless Sensor Transmitter

Product number:6332

With Vantage Pro2, this solar-powered kit allows you to mount the anemometer in a different location than the integrated sensor suite (up to 1,000 ft. [300 m] from your wireless console/receiver).


Solar-Powered Wireless Sensor Transmitter

Product number:6332

With Vantage Pro2, this solar-powered kit allows you to mount the anemometer in a different location than the integrated sensor suite (up to 1,000 ft. [300 m] from your wireless console/receiver).

Add flexibility in sensor siting options

The anemometer on your Vantage Pro2 integrated sensor suite comes with a cable that allows you to mount it separately, up to 40 ft. (12 m), from the rain collector and temperature/humidity sensors. When greater separation is needed, this kit allows you to mount your anemometer even farther away from the rest of the ISS — as far as 1000 feet (300 meters) from your console/receiver.

With Envoy8X, you can use this kit with any of our sensors including solar radiation, UV, temperature probe, anemometer, rain, temperature/humidity sensors, and third-party sensors that report in a range of 0-3 volts

Long transmission range

Frequency-hopping, spread-spectrum radio  provides reliable transmission up to  1000 feet (300 meters).

For longer distances, add one or more wireless repeaters.

Plenty of power

Solar-powered with capacitor and lithium back up battery.

Battery easily lasts 8 months without sunlight; more than two years depending on solar charging.

Includes

·                Weather-resistant shelter for transmitter

·                Solar panel

·                Backup battery

·                Mounting hardware

Requires

Any Vantage receiver including:

·                Wireless Vantage Pro2 console

·                Wireless Vantage Connect

·                Vantage Vue console

·                Wireless Weather Envoy

·                Envoy8X

Sensor, including:

·                Vantage Pro2 anemometer (included on your Vantage Pro2 ISS)

·                Temperature probe

·                Temperature/Humidity sensor

Using Multiple Sensors:

You can use multiple sensors by adding an Envoy8X which allows you to use a combination of Davis Sensors or even a 3rd-party sensor. Contact Tech Support for guidance and options in setting up your system.

·                Rain collector

·                UV Sensor

·                Solar Radiation Sensor

·                Third Party Sensor

 

Sensor Transmitters Spec Sheets

6331-6332_Spec_Sheet.pdf


UP:None Next:None