LOGO

Rain Collector Heater 7720

Rain Collector Heater 7720

Rain Collector Heater

Product number:7720

Rain collector heater for old style Vantage Pro2 rain collectors. Heats ice and snow to keep your rain collector from freezing. Not compatible with AeroCone rain cones.


Rain Collector Heater

Product number:7720

Rain collector heater for old style Vantage Pro2 rain collectors. Heats ice and snow to keep your rain collector from freezing. Not compatible with AeroCone rain cones.

Keep snow from filling your Vantage Pro2 rain collector with this heater. Great for use in cold climates to measure freezing rain or the moisture content of snowfall.

The heater warms the inside of the cone during cold weather. A thermostat switch turns the power off when temperatures rise and back on when they fall.

Note: The heater must be plugged into an electrical outlet.

Not compatible with AeroCone rain cones. For AeroCone rain collectors, order Rain Collector Cone and Heater (#7721).

·                                 Capable of melting liquid snow at a rate of 1/4 inch (6 mm) of liquid precipitation per hour.

·                                 Warms only the inside of the rain collector and the cone itself.

·                                 Off/On switch allows you to turn heater on when you expect freezing conditions, and turn it off again when weather warms.

·                                 When turned on, the themostat switch turns power off if temperature reaches 110°F (43°C), and  turns it back on with temperature drops to about 85°F (30°C).

·                                 Cable length can be extended to 120 feet (36 m) with two-twisted pair wire; further with single pair cable.

·                                 Not compatible with AeroCone rain cones.

Includes

·                24-watt, 24-volt heater

·                Thermal cut-off switch

·                Control unit

·                Insulating reflective blanket

·                AC-power adapter

·                50′ (15 m) cable

Requires

·                Works with old style Vantage Pro2 rain collectors.

·                Must be plugged into an electrical outlet.


UP:None Next:None